產品名稱：High Performance Low Cost Bench DC Power產品型號：Sorensen XPL SeriesSorensen - XPL SeriesHigh Performance Low Cost Bench DC PowerProduct OverviewThe Sorensen XPL series has been designed to meet the need for compact power supply at a reasonable price. The XPL series provides 30 to 1
產品名稱：High Performance Low Cost Bench DC Power
產品型號：Sorensen XPL SeriesSorensen - XPL Series
High Performance Low Cost Bench DC Power
Product Overview
The Sorensen XPL series has been designed to meet the need for compact power supply at a reasonable price. The XPL series provides 30 to 125 watts of programmable linear DC power. The XPL is a compact, high performance low cost power supply suited for benchtop applications. The XPL Series uses linear regulation for high performance. The XPL Series features excellent line and load regulation with low noise and good transient response. The XPL Series is available in a single, dual and triple output for benchtop use The XPL dual output model has two independent and isolated outputs each with a 0 to 30V, 0 to 2A capability and its own on–off switch. The outputs can be wired in either series or parallel to provide voltages up to 60 volts or currents up to 4 amps. All outputs are instrinsically short circuit proof, and are protected against external voltages and reverse currents. The XPL triple output model has the same features as the dual output model with an additional switchable fixed output of 3.3V and 5V.
Specifications
| Output: Voltage and Current | |||
| Model | Output Voltage | Output Current | Output Power |
| XPL 18-3 | 0-18 V | 0-3.3 A | 60 W |
| XPL 30-1 | 0-30 V | 0-1 A | 30 W |
| XPL 30-2 | 0-30 V | 0-2 A | 60 W |
| XPL 30-2D | 0-30 V | 0-2 A | 120 W |
| XPL 30-2T | 0-30 V | 0-2 A | 125 W |
| XPL 56-1 | 0-56 V | 0-1.1 A | 60 W |
| General | ||
| Feature | Description | |
| Operating Mode | Constant voltage or constant current with automatic cross-over and indication | |
| Voltage Setting | By coarse and fine controls | |
| Current Setting | By single logarithmic control | |
| Line Regulation | < 0.01% of max. output for a 10% line voltage change | |
| Load Regulation | < 0.01% of max. output for a 90% load change | |
| Output Impedance | Typically < 5 mΩ in constant voltge mode. Typically > 50 kΩ in constant current mode | |
| Ripple & Noise | (20 MHz) Typically < 1 mVrms (CV mode) | |
| Transient Response | < 20 μs to within 50 mV of set level for 90% load change | |
| Temperature Coefficient | Typically < 100 ppm/°C | |
| Output Protection | Outputs will withstand forward voltages of up to 20 V above the rated output voltage. Reverse protection by diode clamp for current up to 3 A. | |
| Status Indication | Ouptut ON lamps. Constant current mode lamps | |
| Output Switch | Electronic. Preset voltage and current displayed when output is off | |
| Output Terminals | 4 mm terminals on 19 mm (0.75”) pitch | |
| Meter Resolutions | 100 mV, 10 mA | |
| Meter Accuracy Voltage | 0.3% ±1 digit | |
| Meter Accuracy Current | 0.6% ±1 digit | |
| AC Input | 115 V or 230 Vac ±10% (adjustable internally, option HV for factory set 230 Vac input) Installation Category ll | |
| Power Consumption | 85 VA (XPL 30-1) 160 VA (XPL 30-2, XPL 18-3, XPL 56-1) 320 VA (XPL 30-2D, XPL 30-2T) | |
| Operating Range | 5 to 40°C , 20% to 80% RH | |
| Storage Range | - 40 to 70°C | |
| Environmental | Indoor use at altitudes to 2000 m, Pollution Degree 2 | |
| Cooling | Silent fan-less convection cooling | |
| Safety | Complies with EN61010-1 | |
| EMC | Complies with EN61326 | |
| Dimensions (H x W x D) | 6.3 x 5.5 x 11.6” (160 x 140 x 295 mm) (XPL 30-1, XPL30-2, XPL 18-3, XPL 56-1) 6.3 x 10.2 x 11.6” (160 x 260 x 295 mm) (XPL 30-2D, XPL 30-2T) | |
| Weight | 7.5 lb (3.4 kg) (XPL 30-1) 9.7 lb (4.4 kg) (XPL30-2, XPL 18-3 XPL 56-1) 16.5 lb (7.5 kg) (XPL 30-2D, XPL 30-2T) | |
| Approvals | CE-marked units meet: EN61010-1 and EN61326 | |
