產品名稱：(180-840W) Benchtop DC power supply
產品型號：Sorensen XPF SeriesSorensen XPF Series (180-840W)
Benchtop DC power supply featuring single and dual isolated outputs designed to meet the need for flexibility in the choice of voltage and current.
Product Overview
The Sorensen XPF is a new type of bench power supply designed to meet the need for flexibility in the choice of voltage and current. Typically, the maximum voltage and maximum current are not required simultaneously. The PowerFlexTM design enables higher currents to be generated at lower voltages within an overall power limit envelope. This is achieved by using the latest switch-mode technology.
The XPF60-20D are dual output DC power supplies with two completely independent and isolated outputs. If required, the outputs can be wired in series or parallel to achieve up to double the maximum voltage or double the maximum current. The new XPF60-20S is a single output version of the XPF60-20D providing 60V and 20A within its 420W power envelope.
The XPF Series has advanced digital features while keeping its simple to operate analog controls. The series also has a remote programming option making the popular XPF perfect for some ATE applications. The interfaces included: LXI Class C Ethernet, GPIB, USB and RS-232/423. Please see the XPF download section for XPF60-20DP brochure that fully describes the advanced features.
Features And Benefits
Key Features
● PowerFlex design provides higher currents at lower voltages enabling one model to meet many different voltage/current requirements
● Compact design for bench use or rack mounting (1/2 or 1/4 rack width)
● True analog controls with digital settings locking (S-Lock)
● Mixed-mode regulation with linear final regulation for low noise
● Dual models have isolated voltage tracking and synchronous on/off
● P models have GPIB, RS-232, USB and LXI compliant LAN interfaces plus duplicate rear terminals
Protection
● Over voltage protection per output
● Switchable remote or local sense
Specifications
| Electrical Specifications |
| | Model | XPF 60-10D Series | XPF 60-20 Series | | Voltage range | 0 V - 60 V | 0 V - 60 V | | Current range | 0 A - 10 A | 0 A - 20 A | | Power range | Up to 180 W per output, see PowerFlex power envelope graph | Up to 420 W per output - see PowerFlex power envelope graph | | OVP range | 10% - 110% of maximum output voltage | 1 V to 66 V | | Voltage setting | By coarse and fine controls | | Current setting | By single logarithmic control | | Line regulation | <0.01% for a 10% line voltage change. | | Load regulation | Change in output for any load change within PowerFlex envelope, remote sense connected: Constant voltage: <0.01% of maximum output. Constant current: <0.05% of maximum output. | Ripple and noise
(20 MHz bandwidth) | Both outputs loaded at 16V/10A , CV mode: Typically <1mVrms, <15mV pk-pk; 3mVrms max. | 5mVrms max; typically <3mVrms, <15mV pk-pk, at maximum load, CV mode. | | Transient response | <250µs to within 50mV of setting for a 5% to 95% load change. | | Output protection | Forward protection by OVP trip. Reverse protection by diode clamp for reverse currents up to 3 A. | | Temperature coefficient | Typically <100ppm/°C | | Status indication | LED indication of Output On, CV, CC and Power Limit. Message on display for over-voltage trip | | Output switch | Push-push switch operating electronic power control. Preset voltage and current are displayed when the output is off. | | Output terminals | 4mm terminal on 19mm (0.75") pitch. 15 A max. rating | 4mm terminal on 19mm (0.75") pitch. 30 A max. rating | | Sensing | Remote sensing via a front panel terminal block or local sensing (at output terminals). Selection by slide switch | | Meter resolution | 10 mV, 10 mA | | Meter accuracy | | Voltage | 0.1% +/- 2 digit | | Current | 0.3% +/- 2 digit |
|
|
| | Model | XPF 60-10D Series | XPF 60-20 series | | AC Input | 110 to 240 volts ±10%
50/60Hz. Installation Category II | | Power consumption | 600 VA max. | 1250 VA max. | Operating
temperature range | 5°C to 40oC, 20 to 80% RH | | Storage range | -40oC to + 70oC | | Environmental | Indoor use at altitudes up to 2000m, Pollution Degree 2 | | Safety | Complies with EN61010-1 | | EMC | Complies with EN61326 | | CE-marked units meet | EN61010-1 and EN61326 | | Dimensions (HxWxD) | 210 x 130 x 375mm (1/2 rack width 3U) | Single - 107 x 130 (¼ rack 3U) x 398mm
Dual - 210 x 130 mm (½ rack 3U) x 377mm
(size excludes feet, knobs and terminals) | | Weight | 5.4 kg (11.9 lb) | Single - 4.25 kg (9.35 lb), Dual - 6.3 kg (13.9 lb) |
|
|
| XPF35-10 Power Envelope (each output) |
| |
|
| XPF60-20 Power Envelope (each output) |
|  |
| | Note: Specifications subject to change without notice. |
|
|
產品型錄下載
